Archive for May, 2008
History of the Mini Blind
A mini blind (mini-blind, miniblind) is a type of non-vertical window blind made of long, narrow slats held together by string and located inside the window. Its slats are not as wide as venetian blind slats.2 A mini blind has more slats than a regular Venetian blind because its slats are narrow. The slats of mini window treatments are less than half the width of regular Venetian window coverings. The slats are opened and closed by rotating a rod or by directly pulling a string. They are raised and lowered by pulling other strings.
window treatments made of narrow, light-weight horizontal wood slats, adjustable to admit or exclude light, were developed in 1794, and called Venetian window coverings. The window treatments were often used instead of window curtains or shutters. In the 1840s, these window coverings were held together by flat strips of cloth instead of by cords perhaps to shade the lift holes and like today they came in various colors.4 In 1966, a new pulley system was invented which afforded great improvement in the control mechanism. 5 Over time, narrower slats became more common, as they were easier to clean and they reduced glare at certain settings and their appearance was pleasing to many. In 1946 Henry Sonnenberg and Joe Hunter developed technology and equipment for the production of lightweight aluminum slats (50 mm) for Venetian window treatments, and by 1979, 25 mm slats were popular.6
#TITLE# Sending a Resume
Gay
Easy Resumes
Modern technology has added a new twist to preparing resumes andcover letters. The availability of personal computers and laser printers has raised employers expectations of the quality of resumes andcover letters applicants produce. Electronic mail, Internet postings, and software that reads resumes help some employers sort and track hundreds of resumes. Technology has also given cover letter writers greater flexibility; page limits and formatting standards are no longer as rigid as they were several years ago. The only rule is that there are no rules, says Frank Fox, executive director of the Professional Association of Resume Writers. Resume should be error free no typos or spelling mistakes but beyond that, use any format that conveys the information well.
Gay
North Carlolina General Contract Terms for window coverings Installation
The Dize Company will complete on-site measurements within 10 to 18 days after request from the user. Contract Shading Systems will complete on-site measurements within 10 to 20 days after request from the user. In the event the on site measuring is not completed within the contracted time period, the contractor may be held in default in accordance with paragraph 1, DEFAULT AND PERFORMANCE BOND in the North Carolina General Contract Terms and Conditions, and the state may procure the articles or services from other sources and hold the contractor responsible for excess cost occasioned thereby.
It is important that agencies make the contract administrator aware of any measurement problems.
Gay
Curved Window window blinds
If curved custom blinds are desired, a radius of curvature may be given with the +/-r option. If given as +r, The curvature is upward (which is the usual configuration). If the option is given as -r, then the curvature is downward. The radius indicates how far from each slat its effective cylindrical center resides. Each slat will be broken into as many polygons as is necessary to keep the delta changes in angle less than 10 degrees. (Note that this may result in a rather large number of polygons.)
Gay
Mini Blind contract custom blindsChanges Definition
Contract changes, if any, over the life of the contract are implemented by contract addenda released by the Contract Administrator to the contractor. If the contractor is accepting orders and/or delivering through other parties, for example a manufacturer accepting orders and delivering through a dealer network or dealers receiving orders through a network of other dealers, then it is the responsibility of the contractor to apprise such parties of all such contract addenda.
Gay
THANK YOU LETTERS AND NOTES
“Thank you” is a powerful statement that is seldom heard. Every thank you is an opportunity to sell your qualifications and to leave a fresh impression in the mind of the reader. Send a cover letter or note to employers and employment contacts whenever they have extended themselves in any way on behalf of your job search. At the minimum, a written thank you should be sent after all interviews.
Gay
Referral
Use the referral format to contact employers to whom you’ve been referred. The effective job seeker will receive referrals to many job opportunities through networking and informational interviews. The referral may be to a specific job opening (advertised or unadvertised) or to an employer who may not be hiring. In a cover letter the individual who provided the referral is mentioned in the letter.
Gay
Mini Blind Installation Documentation
The contractor(s) shall provide a copy of all invoices and over per location and a copy of the floor layout to show room numbers and the number of windows with installation.
Invoices shall indicate:
a) Type of window blinds
b)Number of custom blinds at each size
c)Square footage of each blind
d)Total number of discount blinds
e)Total square footage
f)Quantity Discounts
g)Itemized Additional Charges
h)Installation Charge
i)Total Price
Such invoices shall be forwarded to the attention of
Quality Assurance Inspection.Invoices shall be sent on accumulative monthly basis.Failure of the contractor to comply with this requirement may result in the removal of the contractor from the contract.Upon acceptance by quality assurance inspection to determine compliance with specifications, terms and conditions of this contract, approval for payment of this invoice will be forwarded to the using agency.INVOICES WILL NOT BE PAID BY THE USING AGENCY UNTIL QUALITY ACCEPTANCE HAS BEEN APPROVED.
Gay
What to do if Circumstances prevent Delivery?
If circumstances beyond the control of the contractor result in a late delivery and installation, it is the responsibility and obligation of the contractor to make the details known immediately to the contract administrator.
Term Contract No. 870A
Gay
Mini Blind Color Selection
Colors will be chosen from standard color selection (minimum 25) and alabaster must be available.window blinds are to be delivered within 21 days ARP (less holidays). Orders are not to be held to meet a minimum order quantity. Orders of ten (10) or more custom blinds will be charged at one price and orders of nine (9) or less will be charged at separate price.No additional charge for hold downs for door installation.
Gay
Select window coverings Fastest Growing Brand of Window window treatments
Select window coverings.com is the fastest growing brand of Window window treatments. There is broad selection of Window Coverings, Shades, Discount window coverings, available for commercial and household uses. Top quality window treatments at low prices. Many stores offer discount window coverings, shades, shutters, window coverings, and more. Window window treatments and shades are a great way to cover your windows at discount window coverings prices. Most stores offer a great selection of shades. Window coverings can give your home a whole new look. There are many offers window coverings, window treatments, shades, and more at discount window coverings prices. Cheap window treatments are available at most stores which offer inexpensive window window coverings.
Gay
Sign Your Letter
Consider signing the letter in blue ink. It implies the letter is original. The only other ink color to use is black. Never use any other color on the cover letter.
Gay
Window Blind Blogs
Update: We are starting some new forums, blogs and sites, We are considering opening a Open Source Forums at Adison U, any feedback on the idea of doing this and your comments on if you would participate are welcome. We also have opened a Ecology Directory a technology forum. Any feedback on our sites will help.
Gay
Company to Install and Deliver Mini window coverings
A window treatments Company will complete delivery and installation within 20 to 30 days after receipt of order.Contract Shading Systems will complete delivery and installation within 20 to 40 days after receipt of order. In the event the delivery is not received within the contract delivery period, the contractor maybe held in default in accordance with paragraph 1, DEFAULT AND PERFORMANCE BOND in the North Carolina General Contract Terms and Conditions, and the state may procure the articles or services from other sources and hold the contractor responsible for excess cost occasioned thereby. It is important that agencies make the contract administrator aware of any delivery or installation problems.
Gay
Job Match or “T”
It’s always important to match your qualifications to the job and/or employer in the cover letter. This is generally done as part of the body of the letter. In the “T” letter format this is done as bullet points targeting the specific requirements and your corresponding qualifications. Some sources for information to help you match your qualifications include: employment advertisements, company websites, position descriptions, phone conversations with the employer and informational interviews.
Gay
Cover Letter Points to Consider
Whenever possible, address the cover letter to a specific person by name and title. This requires a minimum of research that will ultimately pay off in more interviews. The only time this may not be possible is when responding to a “blind ad” where there is no way to know the name of the company to research. In this case, send the letter to the title of the appropriate hiring manager, e.g., “Production Manager,” “Maintenance Supervisor,” “Office Manager,” etc. Never use the phrase “To Whom It May Concern.”
Gay
Keep it Brief
Keep thecover letter brief, usually no more than three to five paragraphs on one page.
Gay
Energy Efficiency Funding
For more than 20 years, DOE’s I&I program has funded more than 500 energy efficient inventions with nearly 25 percent of them reaching the marketplace. Cumulative sales for those products total nearly $710 million.
DOE’s NICE3 program provides funding to state and industry partnerships (large and small business) for projects that demonstrate advances in energy efficiency and clean production technologies like advanced window blind and window shade systems. State and industry partnerships are eligible to receive a one-time grant of up to $525,000. The industrial partner may receive a maximum of $500,000 in federal funding. The non-federal cost share must be at least 50 percent of the total cost of the project.
Gay
What is a Mini Blind?
The long horizontal slats are held one above the other by the rungs of ladder cords shaped like a ladder. The lower ends of the legs of the ladder cords are secured to the long rail under the slats. Their upper ends are attached to the drive rod in the housing, the elongated box above the slats. As the drive rod rotates, one leg of each ladder cord moves up while the other moves down, causing the angle of the slats to change. In one design, this rotation is achieved by pushing up or pulling down on a long handle called a tilt wand connected to the drive rod by a lever. Lift cords along the ladder cords are also attached to the rail. They pass through holes in the slats and into the housing above, where they go over pulleys, combine and exit through the cord lock. For safety it’s important that the lock always work. A downward pull on the main lift cord raises the slats by the cords pulling up the rail below the slats. The cord lock holds the main lift cord to keep the slats up until the cord is pulled to release the lock. The safety lock made the cord lock easier to use.
Gay
Mini Blind Installation Inspection Requirements
If re-inspection is required, it is the contractors responsibility to submit an inspection request, in writing, to the Quality Assurance Inspections Office. Such requests may be faxed to 919-715-7058.The minimum charge per blind is based on 12 square feet. Aluminum Slat window blinds price includes all colors, slats and tapes. FOB any destination in NC.Colors: Contact the contractor for color chart.Accessories: Additional charges for accessories apply equally and alike to all base prices offered above. Pricing for each item includes installation of the accessories, where applicable. All agencies are urged to remove existing custom blinds and/or shades and hanging brackets prior to installation by contractor.
Gay
Mini Blind Measurement Dimensions
Width x Length (Width Is Always Listed First) If an outside mount is required, the Width of the window should be measured at the top, the middle, and the bottom, with the smallest measurement being the measurement recorded minus 1/4 inch to allow room for the brackets to be installed. The Length of the window should be taken on the right and the left sides, with the smallest measurement being the measurement recorded (do not deduct 1/4 inch from this measurement).
Width x Length (Width Is Always Listed First) For continuous curtain wall windows where outside mount is required, measure the Width from center line of window mullion to center line of window mullion, record this dimension. This should be treated as an inside measurement as stated above.
Call contractor if questions should arise prior to placing your order.
Term Contract No. 870A
Gay
Faux Wood Wide Selection of Sizes
Fauz wood window coverings are a beautiful addition to any home. Not only are Faux Wood window treatments attractive, they can help reduce your heating and air conditioning bills. If you are looking for a change of pace Faux Wood window coverings can give your home or apartment that designer look and feel.
Basic Blind 23×64 Faux Wood - Natural
Basic Blind 27×64 Faux Wood - Natural
Basic Blind 29×64 Faux Wood - Natural
Basic Blind 30×64 Faux Wood - Natural
Basic Blind 31×64 Faux Wood - Natural
Basic Blind 32×64 Faux Wood - Natural
Basic Blind 34×64 Faux Wood - Natural
Basic Blind 35×64 Faux Wood - Natural
Basic Blind 36×64 Faux Wood - Natural
Basic Blind 34×72 Faux Wood - Natural
Basic Blind 35×72 Faux Wood - Natural
Faux wood window treatments are offered at a number of commercial stores. Many stores offer installation services, but of course you can install them yourself! Look around, there are many attractive deals and discounts available, especially if you are planning on installing faux wood window coverings throughout your home!
Gay
Resume Guildlines
This article provides some guidelines for creating resume and cover letters that will help you pass the 30- second test and win interviews. The first section, on resumes, describes what information they should contain, how to highlight your skills for the job you want, types of resumes, and formatting resumes for easy reading and computer scanning. The next section discusses the four parts of acover letter salutation, opening, body, and closing. A final section offers suggestions for finding out more about resumes andcover letters.
#TITLE# Famos Field Trial labs for sale
Gay
How to Measure for Blind INstallation
12. Measurements
For agency installation of Venetian window coverings, please follow the guidelines listed in paragraph 13 for taking measurements.
If installation is to be performed by the agency, measurements should be taken by the agency. It should not be necessary to have a contractor take measurements.
Gay
Company to Install and Deliver Mini window blinds
A custom blinds Company will complete delivery and installation within 20 to 30 days after receipt of order.Contract Shading Systems will complete delivery and installation within 20 to 40 days after receipt of order. In the event the delivery is not received within the contract delivery period, the contractor maybe held in default in accordance with paragraph 1, DEFAULT AND PERFORMANCE BOND in the North Carolina General Contract Terms and Conditions, and the state may procure the articles or services from other sources and hold the contractor responsible for excess cost occasioned thereby. It is important that agencies make the contract administrator aware of any delivery or installation problems.
Gay
Select custom blinds Fastest Growing Brand of Window discount blinds
Select window blinds.com is the fastest growing brand of Window custom blinds. There is broad selection of Window Coverings, Shades, Discount discount blinds, available for commercial and household uses. Top quality window blinds at low prices. Many stores offer discount custom blinds, shades, shutters, window coverings, and more. Window discount blinds and shades are a great way to cover your windows at discount window blinds prices. Most stores offer a great selection of shades. Window coverings can give your home a whole new look. There are many offers window coverings, custom blinds, shades, and more at discount discount blinds prices. Cheap window blinds are available at most stores which offer inexpensive window custom blinds.
Gay
Window Treatment Inovations Funding
Among the projects selected for funding are:
Advanced Processing Technology of Electrochromic Windows: A process to develop new film patterning techniques for energy-saving smart windows. The process improves visible light transmission and reduces glare, while retaining a clear view and increasing thermal comfort. Also, encouraging innovation with window window coverings and shades to help increase energy savings.
An Indirect Route for Ethanol Production: A process to develop fuel ethanol from renewable resources to achieve savings of 80 percent in energy consumption. The process helps U.S. farmers create a market for corn supplies and increases national energy security.
Manufacturing Ceramic Products from Fiberglass Waste: A low-cost energy method of completely transforming fiberglass waste into a dense ceramic product that can be used for window window treatments, shades, as well as other uses. The process could eliminate the need for disposal of 260,000 tons of fiberglass waste annually.
Near-Infrared (NIR) Veneer Strength Sensor for Forest Industry: Use of NIR sensors instead of ultra-sonic technology allows testing for veneer wood strength before drying. The NIR technology will improve process efficiency and reduce product waste, and is expected to save about $23,000 annually in energy costs.
The Force Modulator: A durable sheet metal technology for the steel industry that allows proper control of press forces during part forming.
Gay
Uninvited or Cold-Contact
Use the uninvited format to contact employers who haven’t advertised or published job openings. The focus is on matching your qualifications to the perceived needs of the employer based on labor market research. This strategy requires that a phone or personal contact with the employer either precede or follow the sending of the resume and cover letter.
Gay
Blind Measuring Requirements
In situations where the contractor will be installing window blinds and the agency needs assistance in performing measurements, it is the obligation of the contractor to take on-site measurements. Requests for on-site measurements should be forwarded to the contractor in writing, with the using agencys purchase order number, to be confirmed once the actual measurements are complete and the estimate finalized. A purchase order should result in all instances, unless the estimate exceeds budgetary allowances. Any abuse of this service by agencies should be reported to the contract administrator.
All requests for measurements should be made in written form by the using agency. The State will not be responsible for and misunderstandings that results from oral requests.
Gay
Cleaning up after Mini Blind Installations
Upon completion of installation, vendor shall clean up and dispose of all debris occasioned by his work. All debris is to be removed from premises and rooms shall be left broom clean. If existing window treatments are removed, disposal of such should be at the direction of the using agency and if desired, the responsibility of the contractor. Disposal of window coverings may be off-premises, at the direction of the user.
14.B. Labels
All window treatments sold under this contract shall be labeled inside the headrail with CONTRACTORS name and date of shipment. If the contractor installs window coverings, the date of installation must be shown in place of the shipment date. Failure to identify window treatments will result in rejection by Quality Assurance Inspectors and invoices will not be released until such omission is corrected.
15. Quality Acceptance Inspection
Installations in excess of $2500.00 are required to have a Quality Assurance Inspection.
Gay
Energy Efficiency Funding
For more than 20 years, DOE’s I&I program has funded more than 500 energy efficient inventions with nearly 25 percent of them reaching the marketplace. Cumulative sales for those products total nearly $710 million.
DOE’s NICE3 program provides funding to state and industry partnerships (large and small business) for projects that demonstrate advances in energy efficiency and clean production technologies like advanced window blind and window shade systems. State and industry partnerships are eligible to receive a one-time grant of up to $525,000. The industrial partner may receive a maximum of $500,000 in federal funding. The non-federal cost share must be at least 50 percent of the total cost of the project.
Gay