Archive for July, 2008
New Venetian Blind Created
RADIANCE is description of a set of new venetian discount blinds. The depth of the window blinds (X dimension) is given first, followed by the width (Y dimension), followed by the height (Z dimension). The number of slats to place evenly within this height is given as nslats. The angle of the blind, where zero is perfectly horizontal and a positive angle tilts the positive X edge upwards, is given in degrees. The custom blinds are initially situated so that the corner of the bottom blind isheight/nslats/2 above the XY plane, and all coordinates are positive.Each new slat is placed height/nslats above the previous one, until the top slat is at height - height/nslats/2 . The discount blinds may of course be moved from this starting point with the xform(1) command.
Gay
Energy Efficiency Funding
For more than 20 years, DOE’s I&I program has funded more than 500 energy efficient inventions with nearly 25 percent of them reaching the marketplace. Cumulative sales for those products total nearly $710 million.
DOE’s NICE3 program provides funding to state and industry partnerships (large and small business) for projects that demonstrate advances in energy efficiency and clean production technologies like advanced window blind and window shade systems. State and industry partnerships are eligible to receive a one-time grant of up to $525,000. The industrial partner may receive a maximum of $500,000 in federal funding. The non-federal cost share must be at least 50 percent of the total cost of the project.
Gay
Mini Blind Contract Responsiblities
It is the responsibility of the contractor to call on any state agency, institution, public school, university, or participating non-state agency to discuss requirements and upon written request, take and guarantee measurements. Contractor is obligated to respond to such requests. Contractors responding to telephone requests for measurements will do so at their own risk. The State will not be responsible for misunderstandings resulting from oral requests.
Gay
How to Take Mini Blind Measurements
In order to perform field measurements for venetian window treatments, first you have to determine whether the window coverings are to be mounted inside or outside the window. Please specify which method of installation will be required. If an inside mount is required, the width of the window should be measured at the top, the middle, and the bottom, with the smallest measurement being the measurement recorded. The length of the window should be taken on the left and on the right sides, with the longest measurement being the measurement recorded. The manufacturer will take the necessary deductions.
Gay
One Inch Mini Blind Contract
This contract is established to furnish One Inch Mini window treatments on a periodic basis during the period designated. The contract may be renewed by written agreement of the parties under the same prices, terms and conditions for additional twelve (12)month periods but not beyond December 31, 2007.
Approximately 200 window coverings will be purchased during the contract period. Sizes will range from 17 x 142 wide and 24 to 126 long. Lift cord and wand placement (left or right) to be available. The customer (KUMC) shall perform their own blind installation.
Gay
North Carlolina General Contract Terms for custom blinds Installation
The Dize Company will complete on-site measurements within 10 to 18 days after request from the user. Contract Shading Systems will complete on-site measurements within 10 to 20 days after request from the user. In the event the on site measuring is not completed within the contracted time period, the contractor may be held in default in accordance with paragraph 1, DEFAULT AND PERFORMANCE BOND in the North Carolina General Contract Terms and Conditions, and the state may procure the articles or services from other sources and hold the contractor responsible for excess cost occasioned thereby.
It is important that agencies make the contract administrator aware of any measurement problems.
Gay
Style It!
The paper and style of your cover letter should compliment your resume. You might consider using the same paper stock for both your cover letter and resume.
Gay
One Inch Mini Blind Contract
This contract is established to furnish One Inch Mini custom blinds on a periodic basis during the period designated. The contract may be renewed by written agreement of the parties under the same prices, terms and conditions for additional twelve (12)month periods but not beyond December 31, 2007.
Approximately 200 discount blinds will be purchased during the contract period. Sizes will range from 17 x 142 wide and 24 to 126 long. Lift cord and wand placement (left or right) to be available. The customer (KUMC) shall perform their own blind installation.
Gay
History of the Mini Blind
A mini blind (mini-blind, miniblind) is a type of non-vertical window blind made of long, narrow slats held together by string and located inside the window. Its slats are not as wide as venetian blind slats.2 A mini blind has more slats than a regular Venetian blind because its slats are narrow. The slats of mini discount blinds are less than half the width of regular Venetian window blinds. The slats are opened and closed by rotating a rod or by directly pulling a string. They are raised and lowered by pulling other strings.
custom blinds made of narrow, light-weight horizontal wood slats, adjustable to admit or exclude light, were developed in 1794, and called Venetian discount blinds. The window blinds were often used instead of window curtains or shutters. In the 1840s, these custom blinds were held together by flat strips of cloth instead of by cords perhaps to shade the lift holes and like today they came in various colors.4 In 1966, a new pulley system was invented which afforded great improvement in the control mechanism. 5 Over time, narrower slats became more common, as they were easier to clean and they reduced glare at certain settings and their appearance was pleasing to many. In 1946 Henry Sonnenberg and Joe Hunter developed technology and equipment for the production of lightweight aluminum slats (50 mm) for Venetian discount blinds, and by 1979, 25 mm slats were popular.6
#TITLE# Mini Blind Order Definition
Gay
Faux Wood Wide Selection of Sizes
Fauz wood window blinds are a beautiful addition to any home. Not only are Faux Wood custom blinds attractive, they can help reduce your heating and air conditioning bills. If you are looking for a change of pace Faux Wood discount blinds can give your home or apartment that designer look and feel.
Basic Blind 23×64 Faux Wood - Natural
Basic Blind 27×64 Faux Wood - Natural
Basic Blind 29×64 Faux Wood - Natural
Basic Blind 30×64 Faux Wood - Natural
Basic Blind 31×64 Faux Wood - Natural
Basic Blind 32×64 Faux Wood - Natural
Basic Blind 34×64 Faux Wood - Natural
Basic Blind 35×64 Faux Wood - Natural
Basic Blind 36×64 Faux Wood - Natural
Basic Blind 34×72 Faux Wood - Natural
Basic Blind 35×72 Faux Wood - Natural
Faux wood window blinds are offered at a number of commercial stores. Many stores offer installation services, but of course you can install them yourself! Look around, there are many attractive deals and discounts available, especially if you are planning on installing faux wood custom blinds throughout your home!
Gay
Mini Blind Contract Changes Definition
Contract changes, if any, over the life of the contract are implemented by contract addenda released by the Contract Administrator to the contractor. If the contractor is accepting orders and/or delivering through other parties, for example a manufacturer accepting orders and delivering through a dealer network or dealers receiving orders through a network of other dealers, then it is the responsibility of the contractor to apprise such parties of all such contract addenda.
Gay
Company to Install and Deliver Mini window blinds
A custom blinds Company will complete delivery and installation within 20 to 30 days after receipt of order.Contract Shading Systems will complete delivery and installation within 20 to 40 days after receipt of order. In the event the delivery is not received within the contract delivery period, the contractor maybe held in default in accordance with paragraph 1, DEFAULT AND PERFORMANCE BOND in the North Carolina General Contract Terms and Conditions, and the state may procure the articles or services from other sources and hold the contractor responsible for excess cost occasioned thereby. It is important that agencies make the contract administrator aware of any delivery or installation problems.
Gay
Window Blind Blogs
Update: We are starting some new forums, blogs and sites, We are considering opening a Open Source Forums at Adison U, any feedback on the idea of doing this and your comments on if you would participate are welcome. We also have opened a Ecology Directory a technology forum. Any feedback on our sites will help.
Gay
Mini Blind contract custom blindsChanges Definition
Contract changes, if any, over the life of the contract are implemented by contract addenda released by the Contract Administrator to the contractor. If the contractor is accepting orders and/or delivering through other parties, for example a manufacturer accepting orders and delivering through a dealer network or dealers receiving orders through a network of other dealers, then it is the responsibility of the contractor to apprise such parties of all such contract addenda.
Gay
Mini window blinds to be Furnished and Installed
If circumstances beyond the control of the contractor result in a late delivery, it is the responsibility and obligation of the contractor to make the details known immediately to the contract administrator. Delivery/Installation: This contract provides for custom blinds to be furnished only or furnished and installed. In instances where furnish and install is requested, discount blinds are to be delivered and installed within a guaranteed delivery and installation schedule.
Gay
Amazon Books made a lot easier everything to buy the right books for Relations. Users exactly buy what they want and the most important and effective way to select featured books by reading reviews for select books. If you are looking for featured selected books for reasonable price then you should check amazon.com
Blind Shading Systems Delivery Timing
Contract Shading Systems will complete delivery within 15 to 30 days after receipt of order.In the event the delivery is not received within the contract delivery period, the contractor may be held in default in accordance with paragraph 1, DEFAULT AND PERFORMANCE BOND in the North Carolina General Contract Terms and Conditions, and the state may procure the articles or services from other sources and hold the contractor responsible for excess cost occasioned thereby. It is important that agencies make the contract administrator aware of delivery problems.
Gay
Mini Blind Measurement Dimensions
Width x Length (Width Is Always Listed First) If an outside mount is required, the Width of the window should be measured at the top, the middle, and the bottom, with the smallest measurement being the measurement recorded minus 1/4 inch to allow room for the brackets to be installed. The Length of the window should be taken on the right and the left sides, with the smallest measurement being the measurement recorded (do not deduct 1/4 inch from this measurement).
Width x Length (Width Is Always Listed First) For continuous curtain wall windows where outside mount is required, measure the Width from center line of window mullion to center line of window mullion, record this dimension. This should be treated as an inside measurement as stated above.
Call contractor if questions should arise prior to placing your order.
Term Contract No. 870A
Gay
THANK YOU LETTERS AND NOTES
“Thank you” is a powerful statement that is seldom heard. Every thank you is an opportunity to sell your qualifications and to leave a fresh impression in the mind of the reader. Send a cover letter or note to employers and employment contacts whenever they have extended themselves in any way on behalf of your job search. At the minimum, a written thank you should be sent after all interviews.
Gay
New Venetian Blind Created
RADIANCE is description of a set of new venetian window treatments. The depth of the window coverings (X dimension) is given first, followed by the width (Y dimension), followed by the height (Z dimension). The number of slats to place evenly within this height is given as nslats. The angle of the blind, where zero is perfectly horizontal and a positive angle tilts the positive X edge upwards, is given in degrees. The window treatments are initially situated so that the corner of the bottom blind isheight/nslats/2 above the XY plane, and all coordinates are positive.Each new slat is placed height/nslats above the previous one, until the top slat is at height - height/nslats/2 . The window coverings may of course be moved from this starting point with the xform(1) command.
Gay
Mini Blind Measurement Dimensions
Width x Length (Width Is Always Listed First) If an outside mount is required, the Width of the window should be measured at the top, the middle, and the bottom, with the smallest measurement being the measurement recorded minus 1/4 inch to allow room for the brackets to be installed. The Length of the window should be taken on the right and the left sides, with the smallest measurement being the measurement recorded (do not deduct 1/4 inch from this measurement).
Width x Length (Width Is Always Listed First) For continuous curtain wall windows where outside mount is required, measure the Width from center line of window mullion to center line of window mullion, record this dimension. This should be treated as an inside measurement as stated above.
Call contractor if questions should arise prior to placing your order.
Term Contract No. 870A
Gay
Place Your Title Here
Good resumes, applications, and cover letters broadcast your abilities. They tell employers how your qualifications match a jobs responsibilities. If these paper preliminaries are constructed well, you have a better chance of landing interviews and, eventually, a job.
Gay
Mini Blind Color Selection
Colors will be chosen from standard color selection (minimum 25) and alabaster must be available.window treatments are to be delivered within 21 days ARP (less holidays). Orders are not to be held to meet a minimum order quantity. Orders of ten (10) or more window coverings will be charged at one price and orders of nine (9) or less will be charged at separate price.No additional charge for hold downs for door installation.
Gay
Easy Resumes
Modern technology has added a new twist to preparing resumes andcover letters. The availability of personal computers and laser printers has raised employers expectations of the quality of resumes andcover letters applicants produce. Electronic mail, Internet postings, and software that reads resumes help some employers sort and track hundreds of resumes. Technology has also given cover letter writers greater flexibility; page limits and formatting standards are no longer as rigid as they were several years ago. The only rule is that there are no rules, says Frank Fox, executive director of the Professional Association of Resume Writers. Resume should be error free no typos or spelling mistakes but beyond that, use any format that conveys the information well.
Gay
Invoicing for Mini Blind Installation
The contractor shall invoice at the actual installation cost of the discount blinds, per location.The minimum installation charge shall apply only in cases where the installation cost of the window blinds exceeds the minimum installation charge.
*Location is defined as one or more buildings within close proximity to one another requiring installation service. The minimum installation charge is not intended to apply to each building at a single location. When installation can be completed at more than one building, and it is not necessary for the installers equipment to be transported by vehicle between the installation sites, only one minimum installation charge should be applied.
Gay
by Charles
July 6th, 2008
Yesterday I checked out a site on <a href=”http://wealthprotector.net/mortgage-disability-insurance/mortgage-protection-vs-decreasing-term-life-insurance.php”>mortgage term insurance</a>. It’s great to have this if you become disabled. You’ll be able to get your bills payed off in case you do.  What a lot of people don’t know is that the chances of become disabled are so high.
Referral
Use the referral format to contact employers to whom you’ve been referred. The effective job seeker will receive referrals to many job opportunities through networking and informational interviews. The referral may be to a specific job opening (advertised or unadvertised) or to an employer who may not be hiring. In a cover letter the individual who provided the referral is mentioned in the letter.
Gay
Mini Blind Contract Price Control
There will be no provision in this contract for any increase or reduction in the contract prices for any installation for a state agency or public school without approval from the Division of Purchase and Contract.8. Substitutions
Substitutions are not permitted without prior written approval of this division. Failure of the contractor to comply with this requirement may result in the removal of the contractor from the contract.
Transportation Charges:
All goods shall be delivered FOB DESTINATION for all orders equal to, or greater, than the minimum order, when shipped to a single destination. Orders for less than the minimum order will be shipped prepaid, with transportation charges added to the invoice as a separate item. Transportation charges levied by the contractor for orders equal to, or greater than the minimum order, when shipped to a single destination, may be cause for removal of the contractor from the contract. In instances where the contractor makes partial shipments of an order to one destination which is equal to, or greater than, the minimum order, all shipments of the order shall be sent FOB DESTINATION with NO additional transportation charges.
Term Contract No. 870A
Gay
Mini Blind Contract Responsiblities
It is the responsibility of the contractor to call on any state agency, institution, public school, university, or participating non-state agency to discuss requirements and upon written request, take and guarantee measurements. Contractor is obligated to respond to such requests. Contractors responding to telephone requests for measurements will do so at their own risk. The State will not be responsible for misunderstandings resulting from oral requests.
Gay
by Charles
July 4th, 2008
I was checking out some <a href=”http://www.myannuityrate.com/equity-indexed-annuities.php”>fixed index annuity</a> site the other day. Some of these act like a ratchet; Each time it goes up, it locks your savings in. This depends on the design of the annuity.
Blind Shading Systems Delivery Timing
Contract Shading Systems will complete delivery within 15 to 30 days after receipt of order.In the event the delivery is not received within the contract delivery period, the contractor may be held in default in accordance with paragraph 1, DEFAULT AND PERFORMANCE BOND in the North Carolina General Contract Terms and Conditions, and the state may procure the articles or services from other sources and hold the contractor responsible for excess cost occasioned thereby. It is important that agencies make the contract administrator aware of delivery problems.
Gay
Cleaning up after Mini Blind Installations
Upon completion of installation, vendor shall clean up and dispose of all debris occasioned by his work. All debris is to be removed from premises and rooms shall be left broom clean. If existing custom blinds are removed, disposal of such should be at the direction of the using agency and if desired, the responsibility of the contractor. Disposal of discount blinds may be off-premises, at the direction of the user.
14.B. Labels
All window blinds sold under this contract shall be labeled inside the headrail with CONTRACTORS name and date of shipment. If the contractor installs custom blinds, the date of installation must be shown in place of the shipment date. Failure to identify discount blinds will result in rejection by Quality Assurance Inspectors and invoices will not be released until such omission is corrected.
15. Quality Acceptance Inspection
Installations in excess of $2500.00 are required to have a Quality Assurance Inspection.
Gay
Cleaning up after Mini Blind Installations
Upon completion of installation, vendor shall clean up and dispose of all debris occasioned by his work. All debris is to be removed from premises and rooms shall be left broom clean. If existing window treatments are removed, disposal of such should be at the direction of the using agency and if desired, the responsibility of the contractor. Disposal of window coverings may be off-premises, at the direction of the user.
14.B. Labels
All window treatments sold under this contract shall be labeled inside the headrail with CONTRACTORS name and date of shipment. If the contractor installs window coverings, the date of installation must be shown in place of the shipment date. Failure to identify window treatments will result in rejection by Quality Assurance Inspectors and invoices will not be released until such omission is corrected.
15. Quality Acceptance Inspection
Installations in excess of $2500.00 are required to have a Quality Assurance Inspection.
Gay